Datalogic JOYA X1 R2U User Manual page 91

TECHNICAL FEATURES
READING PERFORMANCE
READER
READING INDICATORS
SAFETY & REGULATORY
AGENCY APPROVALS
ENVIRONMENTAL
COMPLIANCE
SOFTWARE
CONFIGURATION AND
MAINTENANCE
DEVELOPMENT
SYSTEM
MEMORY
MICROPROCESSOR
OPERATING SYSTEM
*JOYA X1 should be charged at an ambient temperature between 0 - 35º C to achieve the
maximum charging rate. Never charge the main device or spare batteries in a closed space where
excessive heat can build up Close to the limits of the working temperature, some display and/or
battery performance degradation may occur. Multiple rapid humidity and/or temperature variations
may cause condensing.
** Multiple drops can permanently damage the device.
1D Linear CCD imager engine; Scan rate: 50
scans/sec
Beeper (Polyphonic audio codec); Green Spot
"On Code" good reading feedback (Datalogic
patented feature).
The product meets necessary safety and
regulatory approvals for its intended use.
Complies to EU RoHS.
Wavelink Avalanche® device management pre-
licensed, available upon request.
Datalogic Configuration Utility (DCU).
SDK Suite available upon request.
JOYA™ X1 Basic: System RAM: 128 MB;
System Flash: 512 MB Flash Disc JOYA™ X1
Plus: System RAM: 128 MB; System Flash: 512
MB Flash Disk; 4 GB additional Flash.
XScale™ PXA310 @ 624 MHz; 32 bit.
Microsoft Windows CE 6.0.
6
85