Four Wheel Drive (4Wd) Control - Case 570NXT Operator's Manual

Four Wheel Drive (4WD) control

If equipped, Four Wheel Drive (4WD) significantly improves traction in rough conditions. When the front axle is en-
gaged, operate the machine only in 1st or 2nd gear. Disengage the front axle before operating on the hard surface
or in 3rd or 4th gear.
NOTICE: The use of 4WD when it is not required will increase the wear on machine components and affect the
machines mobility in certain driving situations.
NOTE: 4WD can be engaged when the machine is on the move or at a stop.
Engage or Disengage 4WD:
1. Press the 4WD symbol end of the rocker switch to
engage 4WD system. The 4WD symbol illuminates
when 4WD is engaged.
2. Press the other side of the 4WD switch to disengage.
4 - OPERATING INSTRUCTIONS
4-15
1
RAPH12UTL0089AA