Installing Batteries; Lcd Main Window - Lectrosonics M2Ra Instruction Manual

Installing Batteries

Power is provided by two AA batteries. The batteries are
connected in series by a plate in the battery door. It is
suggested that you use lithium or high capacity NiMH
rechargeable batteries. Do not use alkaline batteries.
WARNING: Risk of explosion if the battery is
replaced by an incorrect type.
Slide the battery
door outward to
open it
Polarity is marked on the rear panel.
Rio Rancho, NM

LCD Main Window

RF Level
Headphone
Volume
RF level
The triangle graphic corresponds to the scale on the
left side of the display. The scale indicates the incoming
signal strength in microvolts, from 1 uV at the bottom to
1,000 uV (1 millivolt) at the top.
Diversity activity
The two antenna icons will alternately light up depend-
ing on which one is receiving the stronger signal.
Battery life indicator
The battery life icon is an approximate indicator of the
remaining battery life. For the most accurate indication,
the user should select "Battery Type" in the menu and
select Alkaline or Lithium.
Audio level
This bar graph indicates the level of the audio entering
the transmitter. The "0" refers to the level reference, as
chosen in the transmitter, i.e. either +4 dBu or -10 dBV.
Mixer mode
Indicates which mixer mode has been selected for the
receiver.
Polarity
markings
Receiver
Diversity
Name
Activity
Audio Level
NOTE: RF level will turn from white to green
when the signal is acquired. This is a redundant
indication of the blue RF Link LED.
Digital IEM Receiver
Frequency
Battery life
indicator
Mixer mode
7