Advertisement
Troubleshooting
Problem
Probable Cause
Power plug is not inserted into
No power
socket correctly.
Audio connector plug not fully
pushed in. Cable Fault.
Excessive hum from
Unsuitable Cable (e.g. cable
system speakers.
grounds not connected).
Power switch not in ON position
Amplifier will not
Power mode switch in wrong
turn on
position
Technical Specifications
Output
Output power
Output power peak
THD+N
Frequency Response
SNR
Connections
Line level inputs
Line level outputs
Power requirement
Mains voltages
Consumption
Weight
Unit only, unboxed
In shipping carton & inc. accessories
Unit dimensions
Wide
High, including feet
Deep (front to back) including terminals
Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice.
Remedy
Plug in securely into unit's IEC socket.
Insert plug securely. Check cable is connected at both ends. Some
"esoteric" cables have internal wiring intentionally disconnected/modified.
For best results on all inputs, please use good quality screened coax; signal
and screen directly connected both ends.
Check the power switch on the back & put it in ON position
Check the power mode switch.
7x 250W/4 ohms
7x 400W/4 ohms
0,003% at 100W power output
20Hz - 20kHz for 0,5dB
105dB at 1kHz at 200W power output
7 line level RCA
7 line level XLR (balanced)
7 line level RCA through outputs
230V/115V Internally set or 100V optional. AC 50/60Hz
2500W, 0,5W standby
32,5 kg
ca. 35 kg
450 mm
195 mm
435 mm
6
Advertisement
