Facilities & Connections - Musical Fidelity M6x 250.7 Instruction Manual

Facilities & Connections
1
Power/Standby button and LED's
1
Turns the unit on or off. You can also use the trigger input to automatically turn on your
M6x 250.7. It will turn on when an external source provides 5-30V on the trigger input.
2 Status LEDs for each channel
Blue LEDs: device is turned on and ready
Red LEDs: fault condition: Overheated, short circuit, DC on outputs
Dimmed red LEDs: standby mode is active
1
2
3
4
1 RCA Analogue input
2 RCA Analogue output (through)
3 XLR Balanced input
4 Speaker output
2
5 Trigger ON/OFF
6 Trigger IN/OUT
7 Power ON/OFF switch
8 Mains IEC socket
5
5
6
7
8