Musical Fidelity MM/MC PHONO STAGE M1 VINL Instructions For Use Manual
Musical Fidelity MM/MC PHONO STAGE M1 VINL Instructions For Use Manual

Musical Fidelity MM/MC PHONO STAGE M1 VINL Instructions For Use Manual

Mm/mc phono stage
Hide thumbs Also See for MM/MC PHONO STAGE M1 VINL:

Advertisement

Instructions for use
Thank you for purchasing the Musical Fidelity M1 ViNL
The M1 ViNL consists of a top quality phono stage with precise RIAA or RIAA/IEC frequency response. It
features switchable loading options for all cartridge types and high quality buffered single ended and balanced
outputs.
This combination yields one of the best high-fidelity systems available at any price.
It is designed particularly to be partnered with Musical Fidelity M1/M3/M6 series products or to add top quality
phono playback to any system
The M1 ViNL should give many years of outstanding musical reproduction. Dust regularly with a soft duster or
soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.
If there are any questions about the audio system, please consult the dealer who is there to help and advise.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM/MC PHONO STAGE M1 VINL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Musical Fidelity MM/MC PHONO STAGE M1 VINL

  • Page 1 This combination yields one of the best high-fidelity systems available at any price. It is designed particularly to be partnered with Musical Fidelity M1/M3/M6 series products or to add top quality phono playback to any system The M1 ViNL should give many years of outstanding musical reproduction. Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.
  • Page 2 CONTENTS Section Page Safety Information – Mains plug (UK only), modification warning General advice – Installation precautions – EU disposal information Disposal information – Introduction, cleaning, installation, power connections, audio Installation connections Facilities and connections – Illustrations - main unit front & rear panels Operation –...
  • Page 3 • If connecting to a BS1363 plug, a 13 amp fuse must be used. WARNING: MODIFICATIONS THIS PRODUCT EXPRESSLY APPROVED BY MUSICAL FIDELITY WHO IS THE PARTY RESPONSIBLE STANDARDS COMPLIANCE COULD VOID USER'S AUTHORITY TO OPERATE THIS EQUIPMENT. M1 ViNL manual issue 2.doc2...
  • Page 4: General Advice

    Do not remove any covers or try to gain access to the inside. There are no user adjustments or fuses to change without qualification. Refer all service work to an authorised Musical Fidelity agent. * Note: Unauthorised opening of the equipment will invalidate any warranty claim.
  • Page 5: Item Disposal Information

    ITEM DISPOSAL INFORMATION DISPOSAL The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the product from other waste to ensure that it can be recycled in an environmentally safe manner.
  • Page 6: Power Connections

    Please note: Musical Fidelity currently do not make any interconnecting cables, nor do we endorse any particular manufacturer’s cables. If required, please refer to the Musical Fidelity dealer who can advise on suitable quality cables for any particular setup.
  • Page 7 FACILITIES & CONNECTIONS DISPLAY LCD backlit black and white MM-C MM load capacitor selector button POWER ON/STANDBY button MC moving coil selector button MM moving magnet selector button MC-R MC load resistor selector button MM-R MM load resistor selector button RIAA/IEC response selector button 15 16 EARTH 4mm banana post...
  • Page 8 OPERATION Switch on and introduction. Make sure the unit is fully connected up and plugged into the mains. Check that the cartridge/turntable outputs are connected to the correct inputs (MM or MC) for the cartridge being used. The orange POWER/STBY LED will be lit indicating the presence of mains supply. Press the POWER/STBY button on front panel.
  • Page 9 OPERATION Choosing cartridge type Select the cartridge being used by pressing the MM or MC button. The display shows current selection and the correct input sockets are automatically switched in. RIAA and RIAA/IEC This setting is common to both MM and MC cartridge types. The -IEC option alters the normal RIAA frequency response by rolling off (reducing) the output at very low frequencies i.e.
  • Page 10 ViNL. If none of these actions affect a cure, please contact the dealer, or an authorised Musical Fidelity service agent. Remember; never open the case of the M1 ViNL, as this will invalidate the guarantee. M1 ViNL manual issue 2.doc2...
  • Page 11: Specifications

    Deep (front to back) including terminals Standard accessories IEC moulded mains lead 10-Amp type Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice. E&OE. M1 ViNL manual issue 2.doc2 Page 11 of 12...
  • Page 12 MANUAL HISTORY RELEASE DATE CHANGES Issue 1 14th April 2011 issue Issue 2 January 2012 P.7 indicator 14 corrected. M1 ViNL manual issue 2.doc2 Page 12 of 12...

Table of Contents