Troubleshooting - Musical Fidelity HT600 Instructions For Use Manual

Basic troubleshooting of the HT600 is similar to troubleshooting of any other electrical or elec-
tronic equipment. Always check the most obvious possible causes first. In our experience most
problems are caused by incorrect, faulty or not properly connected interconnects. Please check
all these first. To give you a few other ideas of what to look for, please check the following:-
ALL 5 Blue LEDs do not light,
Power cord disconnected,
Mains switch switched off,
One of the Blue LEDs does not light,
Unit has a fault
Sound is not precise, lacking in bass
and stereo image
Speakers are connected out of phase
If none of these actions effect a cure, please contact your dealer, or an authorised Musical Fidelity service agent.
Remember, never open the case of the HT600 5 Channel power amplifier yourself, as this will invalidate the guar-
antee.
issue 1/12.07.2000

TROUBLESHOOTING

Re-connect.
Switch on.
Switch off and refer back to you dealer.
Make sure that all speakers are connected
correctly.
HT600 5 Channel power amplifier Instructions for Use. Page 6 of 7