Snom C300 Quick Start Manual page 8

C300 Quick Start Guide
• Premere da due a 5 secondi. Il C300 riproduce una melodia di accensione.
• Presione durante 2 a 5 segundos. El C300 reproduce una melodía de encendido.
Turning off · ausschalten · éteindre · spegni · apagar
• Press for more than 5 seconds. The C300 plays a power down melody.
• Drücken Sie mehr als 5 Sekunden lang auf
• Appuyez sur pour plus de 5 secondes. Le C300 joue une mélodie de mise hors tension.
• Premere per più di 5 secondi . Il C300 riproduce una melodia di accensione.
• Presione durante 2 a 5 segundos. El C300 reproduce una melodía de apagado.
Connecting to a Windows PC via USB
Plug the USB cable into the USB-C port on the C300. Plug the other end of the cable into the USB-A
port on the PC.
When the C300 is recognized by the PC, the circle LEDs turn green for two seconds. The
speakerphone becomes the external audio device of the PC.
Connecting to Snom deskphone, Windows PC, or mobile device via
1. When the C300 is idle, press
2. Open the Bluetooth menu on your Snom deskphone with Bluetooth capability, PC, or mobile
device and, if necessary, start Bluetooth scanning/detection.
3. Select Snom C300 from the list of available devices.
4. If you are asked for a PIN code, enter 0000.
If pairing was successful, the C300 plays three ascending tones. The circle LEDs turn blue for two
seconds. If pairing failed, the C300 plays three rapid tones. The circle LEDs briefly blink blue every
three seconds. Try again or try pairing with a different Bluetooth device.
Note: Only one Bluetooth device can be connected to the C300 at any one time but up to 8 paired
Bluetooth devices can be stored in the C300's memory.
Pairing a mobile device using NFC
1. On your mobile device, turn NFC on.
2. Place the NFC zone of your mobile device against the NFC zone of the speakerphone (indicated
8
. Das C300 spielt eine Ausschaltmelodie.
for two to five seconds. The circle LEDs flash blue.
Bluetooth pairing