Seaside Casual Greenwich 611 Assembly Instructions

Bench

Greenwich 80" Bench

611

PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING.

Carefully remove contents from box. Make sure that all parts and hardware are

Included using the Parts List below.

Tools Required:

3/4" PAN HEAD SCREW

WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114

Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | sales@seasidecasual.com

ASSEMBLY INSTRUCTIONS

4mm Allen Wrench (included); #2 Phillips Head Screwdriver; Socket set

(Recommended: Rubber Mallet; Power Drill)

x 1

1/4" X 80mm HEX HEAD LAG

x 1

x 10

LEG

4mm ALLEN WRENCH

Actual Size

x 4

x 8

x 1

Page 1

Table of Contents

Do you have a question about the Greenwich 611 and is the answer not in the manual?

Page 1 1/4” X 80mm HEX HEAD LAG 3/4” PAN HEAD SCREW 4mm ALLEN WRENCH Actual Size x 10 WARRANTY QUESTIONS OR COMMENTS PLEASE CALL TOLL FREE AT 1-800-809-3114 Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | sales@seasidecasual.com Page 1...
Page 2 ATTACH LEGS On a clean at surface connect Legs to Frame Assembly with (2) 1/4”x80mm Lags (AS SHOWN). Do Not Over Tighten. ATTACH SEAT ASSEMBLY On a clean surface place frame and legs on top of the top assembly and attach with (10) 3/4”...