Table of Contents
Advertisement
Precautions for use
while connecting
with a twisted pair
cable transmitter
About installation / connection
●
Ask a professional or the dealer to carry out the cable
wiring work for DIGITAL LINK connections. Insufficient
wiring work may cause the inability to apply the cable
transmission characteristics and cropped or fuzzy
images and sounds.
●
The transmission distance between the twisted
pair cable transmitter and this product is normally
up to 100 meters. When transmitting 4K signal,
the maximum is 50 meters. When the transmitter
supports [Long reach] communication method, the
transmittable distance is up to 150 m. Please note
that if exceeding the limit, video or audio may be
interrupted, or malfunction may be caused during
LAN communication. Furthermore, when connecting
using [Long reach] communication method,
depending on the specification of the transmitters,
transmittable video signals or the distance may be
limited.
●
Do not use a hub between the twisted pair cable
transmitter and this product.
●
When connecting this product using the twisted pair
cable transmitter (receiver) of other manufacturer,
do not use another twisted pair cable transmitter
between the twisted pair cable transmitter of other
manufacturer and this product. The images and
sounds may be interrupted or become unstable.
●
If possible, lay the cable extended and not coiled in
order to minimize both external and internal noise.
●
Lay out cables of the twist pair cable transmitter and
this product away from other cables, especially from
the power supply cable.
●
When laying multiple cables, keep them together as
close as possible running parallelly and not bundled.
●
The signal quality cannot be confirmed on a model
that does not support DIGITAL LINK signal quality
display on the on-screen menu.
After laying cables, ensure that the signal quality is
-12 dB or lower on a model that supports DIGITAL
LINK signal quality display on the on-screen menu.
6
English
About twisted pair cables
●
Between the twisted pair cable transmitter and
this product, use a LAN cable that conforms to the
following conditions.
It meets or exceeds CAT5e standards
•
It is a straight cable
•
It is a shielded cable (with a connector)
•
It is a solid cable
•
●
When laying the cable(s), use an instrument such as
a cable tester or cable analyser and check whether
the cable characteristics are CAT5e or above. When
using a relay connector along the path, also include
this in the measurements.
●
Do not pull cables hard. Also, avoid bending or folding
them forcefully.
Others
●
This product is compatible with Panasonic devices
that support DIGITAL LINK output (ET-YFB100G,
ET-YFB200G). For the twisted pair cable transmitter
of other manufacturers, see the web site.
(https://panasonic.net/cns/prodisplays/solutions/
technology/digital_link/compatible_equipment/)
●
Panasonic has tested other manufacturers' devices
according to our check items. This will not guarantee
all the operations. For operation and performance
defects caused by other manufacturers' devices,
contact each manufacturer.
Advertisement
Table of Contents
