Table of Contents
Advertisement
3. Position the wheel/tire D up underneath the fender E.
4. Position the axle B into the camber bushing F.
CAUTION!
Risk of Damage
Damage to the camber bushing may result if
the rear wheel axle is overtightened.
– Do not overtighten.
5. Securely tighten the axle with 1/4" hex key.
60001470-A
Fig. 5-7
Fig. 5-8
5.3 Adjusting the Control Steering Mechanism
Different speeds and conditions will affect the way
the racing chair handles. Extreme crosswinds should
be taken into consideration.
Adjustments to the track control steering mechanism
should be made while sitting in the racing chair.
To prevent disqualification, it is critical that the track
control steering mechanism be set to control the
chair within the assigned lane and at the speed you
intend to race.
Location: The ideal place to adjust the tracking on
your racing chair is a race track where you can use
the lines as a guide.
Initial Setup
25
Advertisement
Table of Contents
Troubleshooting
