Back Upholstery Adjustment - Invacare Top End Eliminator User Manual

7.2 Back Upholstery Adjustment

There are three basic attachment points: Hook and
Loop strap at the top, back upholstery strap and
lower flap.
Review the component identification chart in the
Back Upholstery Components section.
Adjusting the Back Upholstery to be "loose"
If the tension on the back strap is adjusted to be
"loose" then the athlete will be positioned further
rearward in the cage (this allows the pelvis to go
back further in the chair).
If the tension on the back strap is adjusted to be
tight then the athlete will be positioned further
forward in the cage (this allows the pelvis to be
more forward in the chair).
Adjusting the tension of the back upholstery is a
"fine tuning" of the axle position or how tippy the
chair feels. This setting (forward or aft in the cage)
is each athlete's personal preference.
60001470-A
Rear View of Back Upholstery Strap G
1. Disconnect each side of the back upholstery strap as
shown.
Fig. 7-10
Upholstery
33