Section 2-Front Hangers; Adjusting Footrest Height - Invacare Esprit Action Service Manual

S E C T I O N 2 — F R O N T H A N G E R S
After ANY adjustments, repair or service and before use, make sure all
attaching hardware is tightened securely - otherwise injury or damage may
occur. To adjust the leg rest, refer to dedicated paragraphs in user manual.
A 50 mm clearance between the bottom of the footplate and the ground/floor MUST
be maintained always.

Adjusting Footrest Height

NOTE: For this procedure, refer to FIGURE 2.1.
1. Remove calf strap, if so equipped.
2. Unscrew locking screw (5 mm Allen Key).
3. Position the footrest assembly to the desired height.
NOTE: A 50 mm clearance between the bottom of the footplate and the ground/floor
MUST be maintained always.
4. If the distance between the bottom of footplate and the ground/floor is not 50 mm
minimum, adjust footrest tube accordingly.
5. Using the locking screw (M6) with a 5 mm Allen Key, secure the footrest tube to the
footrest support.
6. Securely tighten (5 Nm).
7. If necessary, repeat STEPS 2
8. Reinstall the calf strap, if so equipped.
FIGURE 2.1 Adjusting Footrest Height
W A R N I N G
5 to adjust remaining footrest.
-
50 mm mini
7
SECTION 2—FRONT HANGERS
Locking
Screw (M6)