Table of Contents
Advertisement
Motherboard Connections
This section describes the connections on the motherboard and provides pinout definitions.
Note that depending on how the system is configured, not all connections are required. The
LEDs on the motherboard are also described here. A serverboard layout indicating component
locations may be found in Chapter 1.
Please review the Safety Precautions in Chapter 3 before installing or removing components.
4.1 Power Connections
Two power connections on the X11DDW-L must be connected to the power supply. The wiring
is included with the power supply.
•
24-pin Primary ATX Power (JPWR3)
•
8-pin Processor Power (JPWR1/JPWR2)
Main ATX Power Connector
JPWR3 is the 24-pin ATX main power supply connector. This primary power supply connector
meets the ATX SSI EPS 24-pin specification. You must also connect the 8-pin (JPWR1/
JPWR2) CPU power connectors to your power supply.
Important: To provide adequate power to the motherboard, connect the 24-pin and the 8-pin
power connectors to the power supply. Failure to do so may void the manufacturer's warranty
on your power supply and motherboard.
Chapter 4
ATX Power 24-pin Connector
Pin Definitions
Pin#
Definition
Pin#
Definition
13
+3.3V
1
+3.3V
14
NC
2
+3.3V
15
Ground
3
Ground
16
PS_ON
4
+5V
17
Ground
5
Ground
18
Ground
6
+5V
19
Ground
7
Ground
20
Res (NC)
8
PWR_OK
21
+5V
9
5VSB
22
+5V
10
+12V
23
+5V
11
+12V
24
Ground
12
+3.3V
Required Connection
41
Chapter 4: Motherboard Connections
Advertisement
Table of Contents
