Panasonic AG-DV2500P Service Manual page 83

1.6 HOW TO REMOVE THE MECHANISM ASSEMBLY
To remove only the mechanism assembly from the mechanism
unit.
(1) Remove the shield case on the DV/CPU board and remove
the CN107 FPC wire from the drum assembly.
Fig. 1.6.1
(2) Remove the FFC wires that connects the mechanism board,
which is mounted on the backs of the mechanism assem-
bly, MDA/DC board, and the DV/CPU board.
(3) Remove the four screws
(4) Remove the mechanism assembly as shown in Fig. 1.6.3.
7
Fig. 1.6.2
CN107
7
on the side.
To: CN114
MDA/DC board
For instructions on disassembling each part of the mecha-
nism assembly, please refer to the Section 2.
7
To: CN119
MDA/DC board
Fig. 1.6.3 Mechanism assembly
To: CN117
MDA/DC board
1-5