Panasonic AG-DV2500P Service Manual page 63

No. Item
°
17 Supply pole base assembly/
SUP pole base assembly
SUP loading arm
assembly
18 Supply loading arm assembly/ Take-up loading arm assembly
Fig. 2.6.18 Sub Deck Bottom Side
2-18
Ref. Illustration
·
Take-up pole base assembly
TU pole base
assembly
( W4 )
( W4 )
( W5 )
( W4 )
( W4 )
TU loading arm assembly
Fig. 2.6.17
Procedure
<Disassembly>
Do this procedure in the loading end position.
Supply pole base assembly:
1) Remove the two slit washers (W4) and remove the
supply pole base assembly.
Take-up pole base assembly:
1) Remove the two slit washers (W4) and remove the
take-up pole base assembly.
<Assembly>
1) Reverse the disassembly procedure.
<Disassembly>
Do this procedure in the loading end position.
Take-up loading arm assembly:
1) Remove the slit washer (W5) and remove the take-
up loading arm assembly.
Supply loading arm assembly:
1) After removing the take-up loading arm assembly,
remove the supply loading arm assembly.
<Assembly>
1) Reverse the disassembly procedure.
2) Attach so that the gear holes on the assemblies
face each other.