Panasonic AG-DV2500P Service Manual page 149

Measuring
No. Item instruments &
Input signals
42 PAL LINE IN WFM (PAL) or
EE Y level oscilloscope
adjustment LINE IN
PAL 100% color
bar
43 PAL LINE IN WFM (PAL) or
EE C level oscilloscope
adjustment LINE IN
PAL 100% color
bar
300mVp-p
(3) On-screen display adjustment
44 On-screen Monitor TV Color
display bar (built-in
position signal)
adjustment
456789012345
Adjust so that the boundary between
the Red and Blue color bars comes in
the space between "4" and "3".
3-22
Mode
EE
ADJUST
MENU, 273.
LE EE Y LEV
(PAL)
700mVp-p
EE
ADJUST
MENU, 274.
LE EE C LEV
(PAL)
EE
ADJUST
MENU, 200
OSD ADJ
Red Blue
Measuring point ( * )
Adjustment parts ( - )
Adjustment level ( + )
* Y OUT (Y/C jack) (75 !
(1) Set the INPUT SELECT SW to LINE or Y/C.
terminated) (2) Select ADJUST MENU No. 273, "LE EE Y LEV
- [PLAY] and [STOP]
buttons (3) Adjust so that the level from the pedes-
+ 700 mVp-p
(4) Press the [SET] button to store the adjustment
* C OUT (Y/C jack) (75 !
(1) Set the INPUT SELECT SW to LINE or Y/C.
terminated) (2) Select ADJUST MENU No. 274, "LE EE C LEV
- [PLAY] and [STOP]
buttons (3) Adjust so that the burst levels are as speci-
+ 300 mVp-p
(4) Press the [SET] button to store the adjustment
* LINE OUT or Y/C OUT
(1) Set the INPUT SELECT SW to LINE or Y/C.
(75 ! terminated) (2) Select ADJUST MENU No. 200, "OSD ADJ".
- [PLAY] and [STOP]
(3) Adjust so that the boundary between the Red
buttons
+ Between "3" and "4"
1/5 character
(4) Press the [SET] button to store the adjustment
Adjustment procedure
(PAL)".
tal to 100% WHITE is as specified.
data.
(PAL)".
fied.
data.
and Blue color bars comes in the space be-
tween "4" on the second position from the right
of the array of figures on the bottom of the
screen and "3" on the third position.
data.