Firmware Update Procedure - Marantz PM7000N Service Manual

FIRMWARE UPDATE PROCEDURE

1. Items necessary for update
Items necessary for update are as follows.
Update Type Needed Part for Update
USB flash drive (USB 2.0 : Min 1GB)
Via USB • We recommend a USB memory device
that has an LED installed.
Internet Connection by Broadband Circuit
Modem
Via OTA
Router
Ethernet cable
(CAT-5 or greater is recommended)
Table 1
Update download file when the DIGITAL PCB or network module is replaced
Model Name Model Area
PM7000N ALL
Table 2
Update download file when the firmware is updated (Two files, "HW component" and "Network component")
Model Name Model Area
PM7000N U North America (U)
PM7000N N Europe (N)
PM7000N F Japan (F)
Requirement
Formatting FAT16 or FAT 32
-
-
-
-
Download from SDI
avr_40.prod.update.factory.xxxx.zip
For HW component
Product ID : 100200140100
Product ID : 100200140200
Product ID : 100200140400
Standard Service Equipment
Purchase from D&M Article code
Not offered by D&M
X
X
X
X
X
Download from SDI
DPMS_PM7000NALL_LEGO_xxx.zip
57
Offered / not Offered
Download from SDI
- "Table 1" or "Table
-
-
-
-
For Network component
heos_40.prod_x.xxx.xx.zip
2"
-
-
-
-