Marantz PM7000N Service Manual page 36

DISASSEMBLY
Flowchart
• Remove each part following the flow below.
• Reassemble the removed parts in the reverse order.
• Read "SAFETY PRECAUTIONS" before reassembling the removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the work. Failure to shape the wires correctly may cause problems such as noise.
• See "EXPLODED VIEW"
1. FRONT ASSY
and "EXPLODED VIEW"
FRONT PCB
Ref. No. of EXPLODED VIEW : P 1
VOLUME PCB
Ref. No. of EXPLODED VIEW : P 2
SELECTOR ENCODER PCB
Ref. No. of EXPLODED VIEW : P 3
VOLUME ENCODER PCB
Ref. No. of EXPLODED VIEW : P 4
HEADPHONE PCB
Ref. No. of EXPLODED VIEW : P 10
and "EXPLODED VIEW"
SPK PCB
Ref. No. of EXPLODED VIEW : P 8
FRONT ASSY
DISASSEMBLY
DIGITAL PCB
MODULE
PHONO PCB
AMP PCB
WIRE FIXED A PCB
WIRE FIXED B PCB
SPK PCB
DISASSEMBLY
5. SPK PCB
MAIN PCB
TOP COVER
DIGITAL ASSY
DISASSEMBLY
2. DIGITAL ASSY
and "EXPLODED VIEW"
Ref. No. of EXPLODED VIEW : P 6
Ref. No. of EXPLODED VIEW : P 17
PHONO PCB
DISASSEMBLY
3. PHONO PCB
and "EXPLODED VIEW"
Ref. No. of EXPLODED VIEW : P 7
HEAT SINK ASSY
DISASSEMBLY
4. HEAT SINK ASSY
and "EXPLODED VIEW"
Ref. No. of EXPLODED VIEW : P 8
Ref. No. of EXPLODED VIEW : P 12
Ref. No. of EXPLODED VIEW : P 13
MAIN PCB
DISASSEMBLY
6. MAIN PCB
and "EXPLODED VIEW"
Ref. No. of EXPLODED VIEW : P 5
36
SMPS PCB
DISASSEMBLY
7. SMPS PCB
and "EXPLODED VIEW"
SMPS PCB
Ref. No. of EXPLODED VIEW : P 11
TRANS
DISASSEMBLY
8. TRANS
and "EXPLODED VIEW"
TRANS
Ref. No. of EXPLODED VIEW : P 16