Marantz PM7000N Service Manual page 51

1-4. All Device DPMS Update mode
Standard updates are now performed through OTA.
See "6. Normal Firmware Update Method from OTA (NETWORK
1-5. Display check mode
Check the display.
Since this mode is only for production/development, the detailed information is not provided.
MODULE)"
51
1-6. Initialize
Initializes all MCU and network module backup data.
NOTE : If initialization is executed in Network Off mode, cancel Network off mode then reset the Net-
work.
1-9.1. Starting up
Insert the AC plug while pressing "POWER" button, and wait for more than 3 seconds.
Select the "Initialize" using the "CURSOR f / d " button, then press the "ENTER" button to confirm.
"Initialized" is shown on the display for 5 seconds.
"Initialized" is displayed for 5 seconds, then the language selection screen is displayed.
After "Initialized" is displayed, 90 seconds are required to complete initialization.
(The network device is started and initialized during this time.)
1-9.2. Initialization item
Network module backup data
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
(11) Crestron Connected Setup
(12) TV Input setting
(13) IR Control setting
MCU backup data
Items
(1) Source
(2) Dimmer
(3) Sleep
(4) Repeat / Random
(5) Setup Menu items
(6) Volume
(7) Last Digital In
(8) Source Direct
(9) Panel/Remote Lock
Default
Internet Radio
100%
Off
Off
Clear all (except TV Input & IR Control)
0
Optical 1
Off
All off