Error Display - Marantz ND8006 Service Manual

1-6-4. Error display

・If an error occurs, operations stop and the error display is displayed.
Operation button (only for this unit)
・"CURSOR d / f " : Item selection
Heat run Error code table
・E1-00: Disc cannot be detected.
・E1-01: Tracking offset adjustment not possible.
・E1-02: Focus offset adjustment not possible.
・E2-00: Focus servo dropped during playback.
・E2-01: Focus servo dropped during searching.
・E2-03: Focus servo dropped during TOC reading.
・E2-05: Focus servo dropped while pausing.
・E2-10: Subcode became unreadable during playback.
・E2-11: Subcode became unreadable during searching.
・E2-12: Subcode became unreadable during TOC reading.
・E2-14: Subcode cannot be read while pausing.
・E2-15: Subcode cannot be read during manual search.
・E3-00: TOC could not be read within the specified time.
・E3-01: PVD/SVD analysis was not be completed within the specified time.
・E4-04: Search time out (The search was not completed within the specified time).
・E4-05: Decoder bus error (Error in communications with CD decoder).
・E5-00: Inner switch is not on.
・E6-00: Inner switch is not off.
・E8-00: Tray is not opened by the specified time.
・E8-01: Tray is not closed by the specified time.
・E9-00: CD Microprocessor error.
・E9-01: Error other than above.
Error code display
・Repetition count when an error occurs
・CD playback position when an error occurs (For chucking mode, displays "00Tr 00:00")
1-7. Initialize
Initializes all MCU and network module backup data.
NOTE: If initialization is executed in LEGO Off mode, cancel LEGO off mode then reset the LEGO Net-
work.
1-7.1. Starting up
Insert the AC plug while pressing button "POWER", and wait for more than 3 seconds.
Release button "POWER" when the power indicator turns green.
Select the "Initialize" using the "CURSOR f / d " button, then press the "ENTER" button to confirm.
"Initialized" is shown on the display for 5 seconds.
Wait for more than 90 seconds after "Initialized" is displayed and then turn the power off.
(During this time, start and initialize the network devices.)
1-7.2. Initialization item
Network module backup data
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
(11) Crestron Connected Setup
MCU backup data
Items
(1) INPUT
(2) Dimmer
(3) Sleep
(4) Repeat / Random / Program
(5) Favorites list
(6) Setup Menu items
(7) Variable Volume
(8) Volume Limit
(9) Standby / Power On
(10) Tray Lock Mode
(11) (Disc / Folder) Mode
71
Default
Internet Radio
100%
Off
Off
Clear all
Clear all
54 (-40dB)
Off
Power On
Off
Disc mode
s