Programming Track Numbers; Clearing The Program; Loudest Passage Searching; Time Display - Marantz CD5000 User Manual

ADDITIONAL FUNCTIONS
HIGHLIGHT
CD TEXT
SCROLL
TIME

Programming track numbers

You can select a number of tracks and store these in the
memory in the desired sequence. You can store any track
more than once. At most, 30 tracks can be stored in the
memory.
1 Press PROG to start programming.
flashes.
y
PROGRAM
Note: If you press PROG while playing a CD, the actual track
will be added to the program.
2 Press PREV. ∞ or NEXT § to select the desired track.
or
• Key in the number of a track with the digits 0–9 on the
remote control.
3 Press PROG to store the track number.
, , and the number of the programmed
y
TRACK TOTAL TIME
track is displayed. The number of programmed tracks is
increased and the time of the track is added to the total
time of the program.
4 Repeat steps 2 and 3 for all tracks to be programmed.
5 Press STOP 9 to end programming.
y lights permamently.
PROGRAM
• It is possible to review the program using the PREV. ∞ or
NEXT §. You can add more tracks by pressing PROGRAM
like you have done before.
6 Press PLAY 2 to start program play.
Note: If you try to store more than 30 tracks
PROGRAM FULL scrolls through the display.
10
All manuals and user guides at all-guides.com

Clearing the program

SHUFFLE FADE
1 If necessary press STOP 9 to stop program playing.
2 Press STOP 9 to clear the program.
PROG EDIT PEAK
Note: The program will also be cleared if you open the tray.

Loudest passage searching

You can search for the loudest passage of a CD or program.
This will help you in adjusting your recording device if
required.
1 If necessary press STOP 9 to stop CD play.
2 Press PEAK to start searching.
• You can interrupt peak play by pressing PAUSE ;. Continue
3 Press STOP 9 to stop playing.
or
• Press PLAY 2 to start CD play.

Time display

You can display time information which is stored on the CD.
While playing a CD or a program the number and elapsed
time of the actual track, and
contains CD-Text the display shows CD-Text information (see
"CD-Text").
• Press TIME several times to display:
Note: If you press TIME when the CD is not playing you may
PROGRAM CLEARED scrolls through the display,
y
disappears and your program is cleared.
PROGRAM
starts flashing. Searching may need a few
y
PEAK
minutes. Then 4 seconds of the loudest passage are
played repeatedly.
peak play by pressing PAUSE ; again.
are displayed. If the disc
TIME
If the disc contains CD-Text, the number and elapsed
y
time of the actual track, and
TIME
The number and remaining time of the actual track, and
y
.
REM TIME
The number of the actual track, the total elapsed time
y
of the CD, and .
TOTAL TIME
y The number of the actual track, the total remaining time
of the CD, and
TOTAL REM TIME
only display the total time of the CD.
are displayed first.
.