Marantz ND8006 Service Manual page 75

PROCEDURE AFTER REPLACING THE PCB.
PROCEDURE AFTER REPLACING THE U-COM, ETC.
FIRMWARE UPDATE PROCEDURE
1. Items necessary for update
2. Update preparation with a USB flash drive (U1004, U3001, NETWORK MODULE)
3. Update method when the DIGITAL PCB or network module is replaced (Using a USB flash drive U1004, U3001, NETWORK MODULE)
4. Update Method for Service Region Settings (U1004, U3001, NETWORK MODULE)
5. Normal Firmware Update Method from USB Flash Drive (U1004, U3001, NETWORK MODULE)
6. Normal Firmware Update Method from OTA (U1004, U3001, NETWORK MODULE)
7. About the error codes (U1004, U3001, NETWORK MODULE)
8. Updating via USB-B (U2506)
UPDATING
75