Overview (Fig. 1); Important Notes; Safety Protection; Using Your Blender - Philips HR3760 User Manual

15 minutes. Remove the ingredients and clear up the
blender jar before starting operation.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Recycling
This symbol means that this product shall not
be disposed of with normal household waste
(2012/19/EU).
Follow your country's rules for the separate
collection of electrical and electronic products. Correct
disposal helps prevent negative consequences for the
environment and human health.
2 Overview (Fig. 1)
a Measuring cup
b Lid of the blender jar
c Blender jar
d Seal ring
e Blade unit
f Blade unit holder
g Rotary knob and quick select programs:
- Rotary knob:
Power on/off the appliance: press the rotary
knob to power on, press and hold it for 2
seconds to power off the unit.
Wake up the appliance: press the rotary knob
to wake up the appliance when it is in standby
mode. (The appliance goes to standby mode
when it is idle for three minutes.)
Select a quick select program: turn the rotary
knob to select a quick select program and press it
to confirm your selection..
- Return button
: press it to stop ongoing
operation and return to selection mode.
- Pulse button
: to blend briefly.
h Motor unit
i Tumbler jar (Optional or HR3760/10)
j Tumbler seal ring (Optional or HR3760/10)
k Tumbler lid (Optional or HR3760/10)
l Mill (Optional)
m Spatula
3 Before first time use
Before you use the appliance and accessories for the
first time, thoroughly clean the parts that come into
contact with food. (Fig. 6)
8 EN
4

Important notes

Stop and unplug the appliance if there is a pungent
smell or smoke. Let it cool down for 15 minutes.
Do not add excessive ingredients. Otherwise, the
ingredient mixture will become too thick or too heavy
to process.
To avoid overloading the appliance, you can
• Add more liquid ingredient
• Process in several small batches
• Use a higher speed setting
5

Safety protection

The blender has a safety protection system. When
Blender run over 3 minutes at a time, it will stop
process automatically. If you have not finished
processing after 3 minutes, switch off the appliance
and let it cool down to room temperature. Never use
over 3 minutes consecutively.
When assembling the blender jar, make sure that the
appliance is powered off first.
Do not attempt to process very thick recipes such as
bread dough or mash potatoes.
6

Using your blender

Using the blender jar (Fig. 2)
To use a quick select program, turn the rotary knob to
select the program you need and press it to confirm
your selection.
To pause ongoing processing, press the rotary knob to
pause. You can press it again to resume.
To stop ongoing processing and return to selection
mode, press the return button.
To process ingredients briefly (such as garlic), press
and hold the pulse button.
Note
•
After three minutes, the blender will stop the
process automatically.
•
Do not blend dry ingredients (for example
pepper corn or star anise).
Using the spatula (Fig. 3)
When the blender is switched on, use the spatula to
enhance the smoothness and consistency of result.
When the blender is switched off, use the spatula to
remove the sticky ingredients on the jar.