Product Overview - Jobsite IR-CB2 Installation & User Manual

PRODUCT OVERVIEW

Figure 1
1. 12VDC Jack – Provides 12 volt DC power to IR-CB2
via a regulated power supply.
2. IR Emitter Outputs – 3.5mm jacks provide output for
either single or dual low-level flashers.
2
1
3
2
7
3. 3-30V AC/DC Status – 3.5mm jack provides
system status to sensors/keypads via a 12V power
supply attached to a switched outlet on the system
receiver or a 12V trigger output.
4
5
6