Download Print this page

Jobsite IR-FMR MKII Datasheet

Jobsite ir-fmr mkii: specifications.

DATA SHEET

For Receiving and Routing

Infrared Commands from

Any Remote Control

IR-FMR MKII

LCD/PLASMA-PROOF FLUSH MOUNT IR RECEIVER

Receiver Jobsite IR-FMR User Manual
Jobsite ir-fmr: user guide (2 pages)
Receiver Jobsite IR-CB1 Installation & User Manual
One zone ir connecting blocks, for routing infrared commands from one ir receiver to four sources (12 pages)
Receiver Jobsite IR-CB2 Installation & User Manual
Two zone ir connecting blocks, for routing infrared commands from two ir receivers to five sources (12 pages)
Receiver Jobsite IR-CB4 Installation & User Manual
Four zone ir connecting blocks, for routing infrared commands from four ir receivers to eight sources (16 pages)
Receiver Jobsite IR-WMR Installation And User Manual
Jobsite ir-wmr: user guide (12 pages)

Receiver Jobsite IR-WMR MKII Datasheet
Jobsite ir-wmr mkii: specifications (4 pages)
Receiver Jobsite M-64 Installation & User Manual
Multizone receiver, for playing four sources in six separate zones (47 pages)
Receiver Jobsite IR-SMR User Manual
Jobsite ir-smr: user guide (2 pages)
Receiver Jobsite IR-SMR MKII Datasheet
Jobsite ir-smr mkii: specifications (4 pages)

Page 1

DATA SHEET For Receiving and Routing Infrared Commands from Any Remote Control IR-FMR MKII LCD/PLASMA-PROOF FLUSH MOUNT IR RECEIVER...
Page 2

IR-FMR MKII LCD/PLASMA-PROOF FLUSH MOUNT IR RECEIVER FEATURES • LCD/Plasma proof design • Rejects interference from flat panel displays, CFL lighting or indirect sunlight • Works with practically all remotes • Extended receiving range INSTALLATION FRIENDLY DESIGN: • 10' (304.8 cm) of connecting wire included •...
Page 3

PREPARING FOR INSTALLATION: The IR-FMR MKII Receiver cable must reach the proposed location of the IR connecting block. If not, use CAT- 5 cable to extend the length. Mark the cable with a wire label, describing where the cable originates from, rather than where it will terminate.