Installation Diagram - Jobsite IR-CB2 Installation & User Manual

INSTALLATION DIAGRAM

Category
5 Wire
JobSite
IR-E1
Emitter
IR-WMR
12V DC Power Supply
(Not Supplied) plugged into
the Switched Outlet
12V DC Power Supply
Plugged into an Unswitched
AC Outlet Powers the System
Test your IR Repeater system by
following three principal guidelines:
1. All components can be operated: Test all of your
2. Operation is consistent: A good test is to
IR-CB2
3. Maximum Range between the Remote Control and
remote controls for all of your equipment.
repeatedly step from Pause to Play with your VCR,
CD, DVD, or Tape player remote control. Operation
should be identical to standing in front of the
component with the remote control pointed
directly at the Receiver window.
the JobSite IR Receiver is similar to the maximum
range between the Remote Control and the A/V
component's IR Receiver: Typically a remote
control with two batteries will have a 15 to 20 foot
range and a remote with four batteries will have a
20 to 30 foot range.
5