Care And Maintenance - Kobalt KIW 124B-03 Manual

OPERATING INSTRUCTIONS
d. If the LED indicator (C) is still flashing after reconnecting the
charger, it means that the charger may be broken and needs to
be serviced or replaced.
3. Wall-mount holes
The charger has hanging
holes for convenient storage.
Install screws in the wall
2-1/4 inches (57.1 mm)
apart vertically. Use screws
sufficiently strong to hold
the combined weight of the
charger and battery pack.

CARE AND MAINTENANCE

All maintenance should only be carried out by an authorized
service organization.
Cleaning
Before cleaning or performing any maintenance, disconnect
the battery charger from the power source. For safe and proper
operation, always keep the charger and its ventilation slots clean.
Always use only a soft, dry cloth to clean your charger; never use
detergent or alcohol.
3
14
2¼"
2¼"
57.1 mm
57.1mm