fantastic furniture Carrington Bed Manual page 9

4
Repeat for every bed slat until finished.
Step 7
2 x Screws
(H3)
(P1)
Ensure the inner space is square.
Place the felt pad (H5) on the centre of the centre rail (P7) as shown. Secure the timber
cross rail (P8) into place in the centre of the side rails (P4/P5) using 2 x screws (H3),
tightening with the Phillips head Screwdriver.
You may now fully tighten all bolts on the headboard (P1), footboard (P2) and side
rails (P4/P5).
fantasticfurniture.com.au
You will need
1 x Allen Key
1 x Felt Pad
(H5)
(P5)
(P8)
(H5)
(P7)
Phillips head Screwdriver
(not provided)
(H6)
(H6)
(P4)
Make sure screws (H3)
are fully tightened.
(H3)
(P8)
(P2)
(H6)
Page 9