Safety; Safety Markings - Steelcase Spine Operating Instructions Manual

Hutch
1 Light (optional)
Optional accessories
• Lamp with adjustable sensor switch
• Lockable storage compartment
Overview of module and table combinations
The Spine module can be combined with the following table
systems:
• Ology H-Bench SI C (Telescopic, Crank, Lift 1, Lift 2)
• Frame One Loop Bench SI C (Bench 2.0)
• Frame One Bench SI C (Bench 2x0)
• Frame Four Bench SI C (Bench 2.0)
• Ology Desk Single SI C (Fixed, Telescopic, Crank, Lift1, Lift 2)
• Frame Four Single SI C (Fixed, Telescopic, Adjust Screw)
• Frame One Plus Single SI C (Fixed, Telescopic, Adjust Screw)
• B-Free Wood Leg SI C (Adjust)
Technical data
Dimensions
A
A Width mm
B Depth mm
C Height mm
1
2
2 Rear panel
B
1
C
B
2
1200 / 1400 / 1600
210 (B ), 435 (B )
1 2
1540
Weight
Width (A) mm
3 FH (min.) kg
3 FH (max.) kg
3 FH Acoustic (min.) kg
3 FH Acoustic (max.) kg
3.5 FH (min.) kg
3.5 FH (max.) kg
3.5 FH Acoustic (min.) kg
3.5 FH Acoustic (max.) kg
4 FH (min.) kg
4 FH (max.) kg
Connected loads
Connected loads of the module 240 V AC / 16 A
Connected loads of the lamp
Type plate and product identification
The type plate of the module is located on the inside of the
power closet.
The type plate of the mounted table is located on the underside
of the tabletop.

Safety

Safety markings

The safety markings for the Spine module and the mounted
table can be found on the underside of the tabletop.
116 1074 001 / 01 – 02/2018
1200 1400 1600
54 57 60
64 74 82
54 57 60
64 74 83
59 67 75
69 80 89
59 67 76
69 80 90
61 70 78
71 82 92
24 V DC
11