Fittings And Tubing - EK-Quantum Velocity2 DDC 4.2 PWM D-RGB - 1700 User Manual

FITTINGS AND TUBING

OPTION 1 - TOP
FILL/DRAIN
PORT
OPTION 2 - SIDE
FILL/DRAIN
PORT
The EK-Quantum Velocity
has two options of fitting placement. The TOP and the SIDE option
as it's shown on the drawings.
It's mandatory to use the top port as the INLET. Mixing the port may
result in poor thermal performance of the water block.
Tighten the fittings in a clockwise direction until the gasket
INLET PORT
underneath is compressed.
The installation of the EK-Quantum Velocity
1700 water block is now complete.
OUTLET PORT
INLET PORT
OUTLET PORT
- 10 -
DDC 4.2 PWM D-RGB - 1700 water block
2
2 DDC 4.2 PWM D-RGB -