1. Introduction
1.1 Checklist
Thank you for purchasing PLANET HPOE-460 4-port
Gigabit IEEE 802.3at High Power over Ethernet Injector
Hub.
Check your package for the following items:
High Power over Ethernet Injector Hub x 1
User's Manual x 1
Power Adapter x 1
Power Cord x 1
If any of these pieces are missing or damaged, please
contact your dealer immediately; if possible, retain the
carton including the original packing material, and use
them again to repack the product in case there is a
need to return it to us for repair.
- 1 -
1.2 About the Power over Ethernet Injector
Hub
PLANET HPOE-460 is the next-generation 4-port Gigabit
IEEE 802.3at High Power PoE injector Hub, featuring both
IEEE 802.3af and High Power IEEE 802.3at Power over
Ethernet (PoE) that combine up to 30-watt power output
and data per port over one Cat 5e/6 Ethernet cable. It
is designed specifically to satisfy the growing demand of
higher power consuming network PD (powered devices)
such as PTZ (Pan, Tilt and Zoom)/speed dome network
cameras, multi-channel (802.11a/b/g/n) wireless LAN
access points and other network devices by providing the
double amount of PoE power more than the conventional
802.3af PoE PSE.
The HPOE-460 is installed between a regular Ethernet
switch and the powered devices; it injects power to the
PDs without affecting data transmission performance. It
offers a cost-effective and quick solution to upgrading
network system to IEEE 802.3af/IEEE 802.3at Power
over Ethernet system without replacing the existing
Ethernet switch. There are 8 RJ45 STP ports on the
front panel of the HPOE-460, half of the ports on the
right panel function as "Data input" and the other half
on the left panel function as "PoE (Data and Power)
output". The 4 "PoE (Data and Power) output" ports
are also the power injectors that transmit DC voltage
to the Cat 5/5e/6 cable and transfer data and power
simultaneously between the Injectors and Splitters.
- 2 -
1.3 Features
8-Port RJ45
4-port 10/100/1000Mbps "Data Input"
4-port 10/100/1000Mbps "Data + Power Output"
Power over Ethernet
IEEE
802.3at
and
IEEE
802.3af
Power
over
Ethernet Mid-span PSE
Up to 4 IEEE 802.3at/802.3af devices powered
52V DC power over RJ45 Ethernet cable to devices
with Ethernet port
PoE power up to 30.8 watts (802.3at PoE)/15.4
watts (802.3af PoE) for each PoE port
Remote power feeding up to 100m
Full power support for each PoE port
Automatically detects powered device (PD)
Circuit
protection
prevents
power
interference
between ports
- 3 -
Hardware
Desktop palm size, wall mountable
LED power input indication
FCC Part 15 Class B, CE
100~240V AC, 50/60Hz, 2A universal power supply
adapter with DC 52V/2.31A power output
Plug & play
Standard Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
- 4 -
1.4 Specifications
Product
HPOE-460
Hardware
"Data" Input Ports 4 x RJ45
Interface
"Data+Power"
4 x RJ45
Output Ports
Data Rate
10/100/1000Mbps
System: Power x 1 (Green)
LED
Per PoE Port: PoE ready/in-use
x 4 (Green)
10BASE-T: 4-pair UTP Cat. 5,
up to 100m (328ft)
100BASE-TX: 4-pair UTP Cat.
5, up to 100m (328ft)
Network Cable
1000BASE-T: 4-pair UTP Cat.
5e/6, up to 100m (328ft)
EIA/TIA- 568 100-ohm STP
(100m or 328ft)
Dimensions (H x W x D)
26 x 70 x 97mm
Weight
220g
Power Requirements
52V DC~56V DC
Power over Ethernet
PoE Power Supply Type
Mid-span
IEEE 802.3af per port DC 52V
15.4 watts
PoE Power Output
IEEE 802.3at per port DC 52V
30.8 watts
- 5 -
Power Pin Assignment
4/5(+), 7/8(-)
PoE Power Budget
120 watts
Number of 802.3af PDs for
Class 0, 1, 2, 3 that can be
4
powered
Number of 802.3at PDs for
Class 1, 2, 3 that can be
4
powered
Number of 802.3at PDs
for Class 0, 4 that can be
4
powered
Standards Conformance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast
Ethernet
IEEE 802.3ab 1000BASE-T
Standards Compliance
Gigabit Ethernet
IEEE 802.3af Power over
Ethernet
IEEE 802.3at Power over
Ethernet Plus
Regulatory Compliance
FCC Part 15 Class B, CE
Environment
Operating Temperature
0 ~ 50 degrees C
Storage Temperature
-10 ~ 70 degrees C
Humidity
5 ~ 95% (non-condensing)
- 6 -
1.5 Product Outlook
IEEE 802.3at
4-Port High Power PoE Injector Hub
PoE in-Use
4
3
2
1
PWR
52V~56V DC
CAUTION
Remove "DATA & PWR"
Connection before power on.
LED Definition:
LED
Color Function
Lights to indicate that the
Power
Green
HPOE-460 has power.
PoE Ready/
Lights to indicate the port is
Green
In-Use
providing 52V DC in-line power.
- 7 -
2. Hardware Installation
This product provides three different running speeds –
10Mbps, 100Mbps and 1000Mbps - in the same device
and automatically distinguishes the speed of incoming
connection.
This section describes the hardware features of the
HPOE-460. Before connecting any network device to the
HPOE-460, read this chapter carefully.
2.1. Before Installation
Before your installation, it is recommended to check
your
network
environment.
If
there
is
any
IEEE
802.3af/802.3at
device
which
needs
power,
the
HPOE-460 can supply power to this Ethernet device
conveniently and easily. The HPOE-460 is equipped with
an AC-DC adapter with 52V DC input and injects this
DC power into the pin of the twisted-pair cable (pair 4,
5 and pair 7, 8).
If there is no power socket for the AC-DC adapter of
your Non-IEEE 802.3af/802.3at networked device, the
HPOE-460 and POE-162S/IPOE-162S can provide you
with DC power for this Ethernet device conveniently and
easily.
The 10Mbps, 100Mbps or 1000Mbps speed in duplex
mode from data port of the HPOE-460 depends on
which Ethernet device is attached to.
- 8 -