5.
It displays the Bottom probe setting screen (Fig.8).
Fill the box " Polarity +" and select " Extension Scanner (64pin)" from the right pull-down menu.
6.
7.
Specify the extension bottom probe to use for applying the measuring signal.
Only if you want to use the extension bottom probe for " Polarity -" as well, select " Extension
8.
Scanner (64pin)" from the right pull-down menu and specify extension bottom probe to use. (Refer
to Fig.11) Then Click the OK button.
[Fig.8] Bottom probe
[Fig.9]
[Fig.10]
[Fig.11]
- 6 -