TAKAYA APT-9411 Series Operator's Manual page 21

Fill the box " Extension Scanner Board" and specify in the box the extension bottom probe to be
5.
canceled.
6. The display goes back to the Step edit list. Now you can see on Step 000008 that the Bottom probe
column isn't substituted by the extension bottom probe.
If the extension bottom probe is canceled to set the test step to use the flying probe, you
should enter the coordinates for the test points (in Teaching system) or the pin numbers
(in Point system) when not in there.
APT-9411 Extension Scanner Board
[Fig.51]
[Fig.52]
- 19 -