TAKAYA APT-9411 Series Operator's Manual page 17

Use your mouse to select " IC1" and click the Select button, and " IC1" is displayed in the Select parts
5.
column as shown in Fig.39.
Select " Extension Scanner(64pin)" from the right pull-down menu at Specify the bottom ground and
6.
specify the extension bottom probe.
7. Click the Execute button to execute your change. Now you can see on the Step edit list that the
Bottom probe column of IC1 is substituted by the symbol of " E11" .
At the operating procedure #4, if you use wildcard character in the searched parts name
such like " IC*" , all IC components with the registered name starting from IC will be listed
in the Object parts column:
So it becomes that much easier to change the ground pin of lot of ICs to the extension
bottom probe.
APT-9411 Extension Scanner Board
[Fig.39]
[Fig.40]
[Fig.41]
- 15 -