Hasselblad X2D 100C User Manual page 35

User Manual
X2D 100C
2. ISO
Tap to open the option list for ISO adjustment. Swipe on the touch display or toggle the
front or rear scroll wheel to select from the list.
3. Drive Mode
There is no icon displayed when Single or Continuous Drive Mode is selected. When
Self Timer, Interval, or Exposure Bracketing Drive Mode is selected, the corresponding
icon will appear. Refer to the Drive Modes section for more information on instructions
for each mode.
4. Focus Mode
There is no icon displayed when Autofocus (AF) is selected. Refer to the Focus Modes
section for more information on instructions for each mode.
5. Image Stabilisation
There is no icon displayed when image stabilisation is enabled. This icon will appear
when image stabilisation is disabled in the settings.
6. Focus Point
When Move Focus Point is enabled in the settings, users can tap the touch display to
adjust the position of the focus point, or spread or pinch on the screen to change the
focus point size. In Manual Focus Mode, the focus indicator will be displayed when
Focus Indicator is selected in the MF Assist settings. Refer to the Focus Modes section
for more information.
There will be a circle for spot metering around the focus point when exposure metering
is set to Spot Metering.
7. Exposure Mode
8. Exposure Scale
Automatic Exposure Mode (A, S, P) displays the current exposure compensation. Manual
Exposure Mode displays the value of light metering.
9. AE Lock (AE-L)
This icon will appear when AE-L is enabled.
10. Aperture
11. Electronic Shutter
This icon will appear when the electronic shutter is enabled in the settings.
12. Shutter Speed
13. Remaining Frames
A storage status icon will appear above the remaining frames when the camera is
reading or writing data. The storage status of the memory card will also be displayed
here. The descriptions of the icons are the same as those on Control Screen. Refer to the
Control Screen section for more information.
CONTENTS
35