Self Timer - Hasselblad X2D 100C User Manual

User Manual
X2D 100C
Single
In this mode, the camera will make one exposure only regardless of how long the shutter
release button is pressed.
Continuous
The camera will make exposures as long as the shutter release button is pressed.

Self Timer

The camera will wait a preset time to make the exposure after the shutter release button is
pressed.
Time: a delay between shutter release and exposure.
When Finished: determines if the function shall be active after a completed cycle or not. If
set to Exit, the drive mode will be set to Single or Continuous automatically after exposure.
After the shutter release button is fully pressed, the touch display, EVF, and top display will
show the countdown screen. The camera will take photos automatically after the preset
countdown ends. Press the delete button to the right of the touch display to exit during the
countdown.
Drive Mode
f/
5.6
Single Continuous
Self Timer Interval
+0.7
12.0
EV
Exposure
Bracketing
80%
Self Timer 200
ISO
Time 2s
90
When Finished Exit
+1.5
SSD
CFe
CONTENTS
Self Timer
10
Exit
60