Table of Contents
Advertisement
Upgrade Steps:
Add or change your video adapter to an existing system, you
may precede a few steps before you install the new hardware
and software (video display driver). The followings are some of
the considerations:
1. To add a new adapter, ensure the mainboard has available
IRQ for new devices, and there is no conflict between each
other.
2. If you try adding this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then you have
to disable that port first. Otherwise, that will be a problem for
the new video adapter setup.
3. The driver installation for system upgrade is the same as
below, if error occurs when you proceed to step 1, 2 or 3,
please consult with your system dealer or the existing
hardware manufacturer support.
Software Installation
®
Windows
2000 Driver Installation
Upgrade video adapter to an existing system. (Windows has
been pre-loaded)
1.
Select [Next] at Found New Hardware Wizard.
2.
Check [Search for a suitable driver for my device (recommended)]
then select [Next].
3.
Insert the Software's CD.
4.
Check [Specify a location:]
5.
Under [Copy manufacturer's files from:] enter D:\WIN2K&XP, where
D is your CD_ROM drive. Then click on [OK].
6.
Select [Next] to install
"Nvidia GeForce FX 5700"
11
driver.
Advertisement
Table of Contents
