pro.point 9040643 Manual page 3

V1.0
This high-quality impact wrench offers lightweight and ergonomic design
for greater user comfort and reduces vibration. It features a 1/2 in. drive,
max. torque rating of 370 ft-lb, 90 PSI pressure rating and 360° exhaust
design with muffler for reduced noise and greater operational capabilities.
WARNING! Read and understand all instructions
before using this tool. The operator must follow
basic precautions to reduce the risk of personal
injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
1. Operate in a safe work environment. Keep your work area clean, well-
lit and free of distractions. Place lights so you are not working in a
shadow.
2. Keep anyone not wearing the appropriate safety equipment away
from the work area.
3. Store tools properly in a safe and dry location. Keep tools out of the
reach of children.
4. Do not install or use in the presence of flammable gases, dust or
liquids.
WARNING! Wear personal protective equipment
approved by the Canadian Standards Association
(CSA) or American National Standards Institute
(ANSI).
1. Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of work
performed.
Visit www.princessauto.com for more information
Low-Profile Air Impact Wrench 9040643
3