MTI FREEDOM MICRO II Power Product Manual page 6

REMOVING SPEEDPLATE™ FROM PUCK
1 Insert the crescent end of the Freedom Micro
into the opening to the right of the LED.
3
With the Freedom Micro
position, rotate the SpeedPlate™ counterclockwise.
www.MTIGS.com | T:800.426.6844
® II tool
® II tool held in the twisted
FREEDOM MICRO
2 Twist the Freedom Micro
and hold it in place.
4
Remove the SpeedPlate™ from the Freedom Micro
Puck, then release and remove the Freedom Micro
tool.
MTI P/N 063-00425 rev A ©2022 MTI All Rights Reserved
® II POWER MANUAL
® II tool clockwise 45 degrees
® II
® II
6