Download Print this page

MTI Freedom Micro II Product Manual

Mechanical high security
Hide thumbs Also See for Freedom Micro II:

Advertisement

Quick Links

Instructions & Videos:
AR: attar.store.mobiletechinc.com
COR: att.store.mobiletechinc.com
Freedom Micro
Contents
1.
Fixture/Track Reference Guide
2.
OEM Power Cable Routing
3.
Track Fixture Mounting
4.
Entertainment Fixture (Through hole)
5.
Speedbracket™ Merchandising
6.
Speedbracket™ Removal
7.
Removing OEM power Cable
8.
Dimensions
WARNING: MTI products contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Proposition 65, California Health & Safety Code Section 25249.6 et seq. Visit oehha.ca.gov for more information.
www.MTIGS.com | T:800.897.1350
-CONTROLLED DOCUMENT-
Questions & Troubleshooting:
800.897.1350
Product Manual for
High Security
DO NOT REMOVE FROM STORE
For additional support, please reach out to our
Contact Center at 800-897-1350
M0494
A-0
Status: Approved
Product Ordering:
AR: attar.store.mobiletechinc.com
COR: att.store.mobiletechinc.com
®
II Mechanical
Order Inquiries:
attsalessupport@mtigs.com
P/N M0494 rev A ©2022 MTI All Rights Reserved
ECO-113512
2
3
4
6
7
9
10
10
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Freedom Micro II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for MTI Freedom Micro II

  • Page 1 Contact Center at 800-897-1350 WARNING: MTI products contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Proposition 65, California Health & Safety Code Section 25249.6 et seq. Visit oehha.ca.gov for more information.
  • Page 2 Through Track with Solid Surface Panel Wall Track Through Track with Acrylic Top Aluminum Track Through Track with Grommet Entertainment Fixture (Through Hole) www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...
  • Page 3 | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved...
  • Page 4 Make sure the Double-Sided System Tool. Make sure that the spacer DOTTED side of the mounting tabs is facing DOWN. number is facing down. www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...
  • Page 5 Double-Sided System Tool to turn the screws to move the mounting tabs into position. Tighten screws to lock position to the fixture. www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved...
  • Page 6 II MHS position into the Align bottom plate to slot adapter. hole. Secure the Freedom Micro ® II Mechanical MHS position with the knob. www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...
  • Page 7 Open the top and bottom bracket arms, then the side arms, in that order. Place the phone into the SpeedBracket™. Adjust the SpeedBracket™ to fit the device snugly. www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...
  • Page 8 Rotate the device and SpeedBracket™ clockwise on the Once OEM cable has been routed (page 3) plug into puck until it locks into place. device. *click* www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...
  • Page 9 Remove the SpeedBracket™ from the Freedom Micro ® ® position, rotate the SpeedBracket™ counterclockwise. II Puck, then release and remove the Freedom Micro tool. www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...
  • Page 10 (reverse order page 3. step 2) SPEEDBRACKET™ DIMENSIONS MAXIMUM: 180mm H x 90mm W MINIMUM: 118mm H x 65mm W 1.11” www.MTIGS.com | T:800.897.1350 P/N M0494 rev A ©2022 MTI All Rights Reserved -CONTROLLED DOCUMENT- M0494 Status: Approved ECO-113512...