Speedplate™ Merchandising - MTI FREEDOM MICRO II Power Product Manual

SPEEDPLATE™ MERCHANDISING
1
Clean the device with an alcohol wipe.
3
Apply the SpeedPlate™ to the phone, with the cable
retainer towards the charge port of the phone. Use the
SpeedPlate™ cable retainer as alignment reference.
www.MTIGS.com | T:800.426.6844
FREEDOM MICRO
2
Peel red backing off of the adhesive on the
SpeedPlate™.
4
Place the device onto the puck and rotate the device
clockwise on the puck until it locks into place.
MTI P/N 063-00425 rev A ©2022 MTI All Rights Reserved
® II POWER MANUAL
5