MTI FREEDOM MICRO II Power Product Manual page 10

ATTACHING SMARTCABLE™
Insert SmartCable into the charge port on the puck.
1
The hooks on cable should click when fully seated.
REMOVING SMARTCABLE
1
Insert the crescent end of the Freedom Micro II tool
into the opening to the right of the LED. Twist the
Freedom Micro II tool clockwise 45 degrees and hold
it in place.
3
Remove the SmartCable from the puck.
www.MTIGS.com | T:800.426.6844
FREEDOM MICRO
Plug SmartCable into the charge port of the device.
2
LED on back of puck will illuminate solid white
when plugged in.
2
Twist the device and bracket off of the position.
4
The loose cable can be clipped into SpeedBracket™
for easy storage.
MTI P/N 063-00425 rev A ©2022 MTI All Rights Reserved
® II POWER MANUAL
10