Table of Contents
Advertisement
Quick Links
PARTS INCLUDED
XD GUARDIAN D SERIES™
Fixed
Barrel Key
WARNING: MTI products contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Proposition 65, California Health & Safety Code Section 25249.6 et seq. Visit oehha.ca.gov for more information.
OPTIONAL MOUNTING KITS
Slot Mounting Kit
Mounting
Plate
Slot
Adapter
Hex Key
Wingnut
www.mtigs.com | T:800.426.6844
-CONTROLLED DOCUMENT-
Swivel
Swivel Lock
If the key is lost, please
refer to the label on the
bottom of the riser and
contact Customer Service.
Through-Hole Mounting Kit
Hex Screw
063-00292
C-0
XD GUARDIAN D SERIES™ PRODUCT MANUAL
Device Bracket (x2)
Phone
Mounting
Plate
Wingnut
MTI P/N 063-00292 rev C ©2020 MTI All Rights Reserved
Status: Approved
Foam
Tablet
Dual Post Mounting Kit
Mounting
Plate
Wing Post
Wingnut
ECO-110530
1
Advertisement
Table of Contents
Related Manuals for MTI XD GUARDIAN D Series
Summary of Contents for MTI XD GUARDIAN D Series
- Page 1 Customer Service. Barrel Key WARNING: MTI products contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Proposition 65, California Health & Safety Code Section 25249.6 et seq. Visit oehha.ca.gov for more information.
- Page 2 Those are the last 5 numbers of the part number. Size Part Number Small 575-01525 Medium 575-01234 Large 575-01297 Wide 575-01358 www.mtigs.com | T:800.426.6844 MTI P/N 063-00292 rev C ©2020 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00292 Status: Approved ECO-110530...
- Page 3 Tighten the wingnut onto the post. See page 6 for bracket installation. www.mtigs.com | T:800.426.6844 MTI P/N 063-00292 rev C ©2020 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00292 Status: Approved ECO-110530...
- Page 4 Tighten the wingnuts onto the post. See page 6 for bracket installation. www.mtigs.com | T:800.426.6844 MTI P/N 063-00292 rev C ©2020 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00292 Status: Approved ECO-110530...
- Page 5 Tighten the wingnuts onto the posts. See page 6 for bracket installation. www.mtigs.com | T:800.426.6844 MTI P/N 063-00292 rev C ©2020 MTI All Rights Reserved -CONTROLLED DOCUMENT- 063-00292 Status: Approved ECO-110530...
- Page 6 Peel the backing off of the foam and place it onto the Insert the USB-A end of the product’s power cable device bracket. down and through the XD Guardian D Series position and connect it to power. www.mtigs.com | T:800.426.6844 MTI P/N 063-00292 rev C ©2020 MTI All Rights Reserved...
- Page 7 FOR TABLET BRACKETS ONLY: Align the holes on the Route the product end of the power cable trough the opening on the front of the XD Guardian D Series tablet bracket bar to the holes on the riser. Use the two position.
Need help?
Do you have a question about the XD GUARDIAN D Series and is the answer not in the manual?
Questions and answers