Display Elements - Terex PT30 Operation And Maintenance Manual

4.1 Display Elements

1 2 3
Learn the location and function of these
items prior to operation.
Switches
1 - Lights, front and rear
2 - Heater Fan (optional)
3 - Front wiper (optional)
4 - Beacon (optional)
8 - Ignition, glow plug (pre-heat)
9 - Auxiliary Hydraulics
Instruments
5 - Fuel Level Gauge
6 - Warning Indicators (4-in-one)
7 - Hour Meter
10 - (not used)
11 - Glow Plug Operation Light
12 - Oil Pressure Warning Light
13 - Battery Voltage Warning Light
14 - Hydraulic Oil Temp. Warning Light
15 - Engine Temp. Warning Light
If the battery voltage light (13) illumi-
nates, drive the machine to a suitable
location and shut the engine off.
Diagnose the problem and make any
necessary repairs before resuming
operation.
The glow plug operation light (11) will illuminate only when the key switch is turned to
engine pre-heat, showing normal operation.
4 MACHINE DESCRIPTION / CONTROLS
4 5
5
6
Should the engine temperature gauge read
excessive temperatures, or should the oil
pressure or hydraulic oil temperature warning
lights illuminate during normal operation, shut
the machine down immediately (in a safe
location). Diagnose the problem and make
needed repairs before continuing to operate.
41
6
7 8
10
12
14
NOTICE
9
11
13
15