Using The Tuner - JVC UX-V50GNUB Instructions Manual

Using the Tuner

FM AUTO
SLEEP DISPLAY
MODE PRESET
TAPE CD
AUX FM/AM
4
CD
VOCAL
VCD NUMBER
REPEAT ECHO
UP UP MASKING
SELECT
< PREV PROGRAM PREV SET NEXT
ON
VCD NUMBER
RANDOM V. INTRO
SCREEN DOWN
AHB
BASS TREBLE CANCEL
PRO
VOLUME
REMOTE CONTROL RM-SUXV50V
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See page 3.)
Setting the AM tuner interval
spacing –––––––––––––––––––––––––––––––
When shipped, the AM tuner interval is set to 9 kHz or 10 kHz
spacing (Initial setting: U/UB/US/UT/UX...9 kHz). You can change
it to 10 kHz or 9 kHz spacing.
To select 10kHz intervals, while holding down the ¢ button
on the unit in Standby mode, press the
turn on the power. (At the same time, the 100kHz spacing is
selected for FM broadcast)
To select 9kHz intervals again, while holding down the 4
button on the unit in Standby mode, press the
unit to turn on the power.
[10 kHz Intervals]
UP
UB... Hong Kong
US... Singapore
Note: When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 9.)
One touch radio ––––––––––––––––––––––
Just press the FM/AM button to turn on the System and start
playing the station you were last tuned to.
You can switch from any other sound source to the radio by
pressing the FM/AM button.
8
STANDBY
AUX
REC
FM MODE
REV
MODE
VCD
NUMBER
AUTO PRESET
TAPE
PHONES
FM/AM
¢
NEXT>
SET
DOWN
button on the unit to
button on the
[9 kHz Intervals]
DOWN
UX... Saudi Arabia
UT... Taiwan ROC
AHB
PRO
VOLUME
TIMER
CLOCK
CD
OPEN/CLOSE
FM/AM CD
SELECT
FM/AM
DOWN MULTI CONTROL UP
¢
PREV RETURN NEXT
4
Band display, Frequency
display, Preset channel
Tuning In a Station
1 Press the FM/AM button.
The band and frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
FM/AM
FM AM
(On the Unit)
2 Select a station using one of the
following methods.
Manual Tuning
Press the 4 or ¢ button repeatedly to move from
frequency to frequency until you find the station you want.
Auto Tuning
If you press and hold the 4 or ¢ button for one second or
more, the frequency changes down, or up, automatically until a
station is found.
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > or <
button on the Remote Control. After one second the display
will show the preset number's band and frequency.
Example: To select preset number 12, press the UP button until
"P12" appears.
UP DOWN
or
FM mode
MONO STEREO
indicators
FM/AM
FM AM
(On the Remote Control)
OR
OR
(After 1 second)