Using The Video Cd Player (Vcds And Cd-Gs); Setting The Tv System - JVC UX-V50GNUB Instructions Manual

Using the Video CD Player (Video
CDs and CD-Gs
< PREV
ON
SCREEN
You can play video CDs (with or without the Playback Control
(PBC) function) and CD Graphics (CD-Gs) to watch the picture on
your TV while listening to the sound through your JVC Micro
Component System.
Before playing video CDs and CD-Gs
• Make sure that the connection between the System and
your TV is correct. If you wish, you can listen to the music
on your TV by connecting the LINE OUT signals to your
TV. (See page 4)

Setting the TV System

To view a picture of video CDs or CD-Gs, it is required that you
set your CD player's TV output mode according to your TV's color
system.
Relationship among the playable CDs, System's TV output
mode and your TV's color system:
Playable CD Player's TV output mode Your TV's color system
NTSC/PAL NTSC
NTSC/PAL PAL
NTSC/PAL PAL AUTO
MULTICONTROL
DOWN
RETURN
2
1 Turn off the power to put the System into
Standby mode.
2 Press the 7 button on the Unit for more
than 2 seconds.
The current TV output mode ("NTSC" for example) appears on
the display for five seconds.
7
FM AUTO
SLEEP DISPLAY
MODE PRESET
TAPE CD
AUX FM/AM
CD #¥8
CD
VCD Number
VOCAL
VCD NUMBER
REPEAT ECHO
UP MASKING
UP
SELECT
PROGRAM PREV SET NEXT
NEXT >
ON
VCD NUMBER
RANDOM V. INTRO
SCREEN DOWN
SET
AHB
PRO BASS TREBLE CANCEL
V. INTRO
VOLUME
VCD Number
REMOTE CONTROL RM-SUXV50V
DOWN
When the System is in use, the display shows other items as well.
For simplicity, only the items described in this section are shown here.
NTSC
PAL
Multisystem
UP MULTICONTROL
RETURN
3 4
VERTICAL DISC
LOADING MECHANISM
VIDEO CD VERSION 2.0 VIDEO CD VERSION 2.0
STANDBY
AHB
AUX PRO
VOLUME
REC TIMER
REV
CLOCK
MODE
VCD
NUMBER
CD
OPEN/CLOSE
TAPE FM/AM CD
SELECT
PHONES
DOWN MULTI CONTROL UP
PREV RETURN NEXT
3 Within five seconds, press the ¢ or 4
Button on the Unit to select the System's
TV output mode.
Each time you press the button, the TV output mode changes as
follows:
NTSC O PAL O PAL AUTO O (back to beginning)
NTSC: for NTSC exclusive TV
PAL: for PAL exclusive TV
PAL AUTO: for multisystem TV
4 Within five seconds, press the 7 button
on the Unit to apply the changes.
5 Turn on the TV and select the video input
on the TV.
6 Press the AUX or TAPE @ # button to
turn on the System.
"Video CD JVC" screen will appear on the TV without
distortion.
Notes:
• If you play an NTSC CD in PAL AUTO mode on a PAL
exclusive TV, the image may be distorted. If this happens
change the CD Player's TV output mode to "PAL".
• When you play an NTSC CD in PAL AUTO mode on a
multisystem TV, the image may blink for a moment. This
symptom occurs when the System detects the formula of the
CD and is not a malfunction.
• You can configure the current TV output mode anytime by
pressing the 7 button on the Unit for more than 2 seconds.
CD Cover
VOLUME +,-
CD OPEN/
CLOSE 0
CD #/8
¢
7
4
13