Table of Contents
Advertisement
There are three timers available – daily timer, recording timer
and sleep timer.
Before using the timers, you need to set the built-in clock.
(See page 8.)
With the daily timer, you can wake to your favorite music or
radio program.
At the timer-on time, the unit automatically turns on, sets the
volume to the preset level, and starts playing the specified
source (radio or CD). Then, at the timer-off time, the unit
automatically turns off (on standby).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
1 Press and hold DISPLAY
MODE until "
ON" starts
blinking on the display, then
press PROGRAM.
The hour indication starts blinking.
2 Press 4 or ¢ to set the
timer start hour, then press
PROGRAM.
The minute indication starts blinking.
3 Press 4 or ¢ to set the
minute, then press
PROGRAM.
"
ON" starts blinking again.
4 Press DISPLAY MODE so
that "
OFF" starts
blinking on the display, then
press PROGRAM.
The hour indication starts blinking.
5 Set the time to stop playback
following the same
procedure as steps 2 and 3.
6 Press DISPLAY MODE so
that "TUNER," "TAPE,"
"CD" or "REC TU" appears
on the display, then press
PROGRAM.
7 Press 4 or ¢ to select
the desired source, then
press PROGRAM.
8 Prepare the source and set the volume.
To listen to the radio, tune in the desired station.
To listen to a CD, load the disc.
9 Press TIMER ON/OFF SET
(or TIMER on the remote
control) to activate the timer.
"
10 Turn off the unit (on standby).
When the preset time is reached, the
selected source is played if the timer
has been activated.
To deactivate the timer, press TIMER ON/OFF SET (or
TIMER on the remote control).
"
" disappears from the display.
• The timer-off function is not activated if the starting and
stopping times are the same.
• If the selected source (CD or TAPE) is not available when
DISPLAY
MODE
preset timer is reached, TUNER is selected automatically.
PROGRAM
You can use the recording timer to record a preset radio
station from a specified time and for a specified duration
SEARCH/TUNING
automatically.
1 Load a recordable tape into the tape deck.
Insert a tape with the open side down and the side to be
recorded facing out from the unit.
SEARCH/TUNING
2 Follow the "Using Daily Timer" procedure on
the left. Select "REC TU" as the source for
timer recording.
DISPLAY
MODE
• If the preset time is reached while the unit is on, the timer
is not activated for timer recording.
• The recording timer is canceled once the recording is
PROGRAM
finished.
DISPLAY
MODE
PROGRAM
SEARCH/TUNING
" lights up on the display.
TIMER
ON/OFF
SET
STANDBY
/ON
Advertisement
Table of Contents
