JVC UX-M3R Instructions Manual page 18

Jvc ux-m3r stereo systems: instruction manual
Hide thumbs Also See for UX-M3R:
Table of Contents

Advertisement

• Use only type I normal tapes.
The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinchroller and
the capstan.
1 Press 0 EJECT to open the
tape deck door.
2 Insert a recorded tape with the open side
down and playback side facing out from the
unit.
3 Close the tape deck door.
The TAPE indicator appears on the display.
1 When the unit is turned on,
press TAPE.
2 Press 6.
Playback starts.
"PLAY" and the 3 indicator appear
on the display.
3 To stop playback, press 7.
Press 6.
The 3 indicator starts blinking and
"PAUSE" appears on the display.
To resume playback, press 6 again.
1 Press 4 or ¢ to rewind
or fast forward the tape.
"REW" or "FF" appears on the
display.
2 Press 7 to stop rewinding or
fast forwarding.
• The tape stops automatically at the end of the rewinding or
EJECT
fast forwarding.
TAPE
PLAY/PAUSE
STOP/CLEAR
PLAY/PAUSE
SEARCH/TUNING
STOP/CLEAR

Advertisement

Table of Contents
loading

Table of Contents