Samsung RH62K Series Service Manual page 23

DISASSEMBLY AND REASSEMBLY
Part Name Description Figure
Disengage the Housing Connectors by
pushing a flatblade screwdriver.
Remove 2 screws of the Case Ice Route
Assy.
Remove 2 hook and Pull the Case Ice Route
Assy.
Disengage the Housing Connector by
pushing a flatblade screwdriver.
NON-PLUMBING
(RH58K*)
While pushing the Tube Fitting, remove the 1
Water Tube.
Assembly shall be in order from the
disassembly. Case-ice and Route shall be
assembled inside of hose.
Otherwise, assemble cannot be accomplished.
When assembling Cover-Display, first insert
it from upper and then assemble to upper.
(Check the wire inside.) and knock the display
into the Case dispenser.
After leveling, check the dispenser (water
supply, operation of auger motor) for pushing
lever dispenser.
23
RS6500KC(RH62K)-FSR-160106.indd 23 2016. 1. 7. 11:03